Product Specifications
Model | Diameter of Pipe (inches/mm) | Length of Pipe (mm) | Max. Water Volume (m³ per minute) | Material | Fitting Type |
|---|---|---|---|---|---|
Integro™ 2 | 2 / 50 | 600 | 0.40 | 304 SST (available in 316) | BSP Threaded (Male) |
Integro™ 3 | 3 / 80 | 600 | 0.88 | 304 SST (available in 316) | NB PN16 Flange |
Integro™ 4 | 4 / 100 | 900 | 1.52 | 304 SST (available in 316) | NB PN16 Flange |
Integro™ 6 | 6 / 150 | 900 | 3.05 | 304 SST (available in 316) | NB PN16 Flange |
Integro™ 8 | 8 / 200 | 900 | 6.09 | 304 SST (available in 316) | NB PN16 Flange |
Integro™ 10 | 10 / 250 | 900 | 9.65 | 304 SST (available in 316) | NB PN16 Flange |
Integro™ General Information
- Without water the Integro™ will generate a high voltage (but low amperage). Do not switch on the power until the installation is complete.
- The Integro™ is generally installed on your cold water main, within 2m of an electrical source.
- The maximum power (electricity) consumed per hour by each Integro™ is 0.039kwh.
- The control box requires a standard 13 amp socket.
- On all applications, to avoid pressure drops, the diameter of the Integro™ should be equal to, or greater than, the size of the pipe it is being installed on.
- You should not exceed the maximum water volume per hour for the Integro™, doing so will render it less effective.
- The Integro™ is pressure tested to 150 PSI/10 Bar.
- The standard operating temperature range for the Integro™ is 2°C – 104°C / 35°F – 220°F
- All Integro™ models are single phase, 120v or 240v and 50/60Hz.
- If the Integro™ is not connected directly to an already earthed metallic pipe, an earth connector should be attached to the pipe of the Integro™ at the time of installation. This must be on an exposed stainless steel section, not over a painted section.
- The control box is not intended to be located outdoors. If this is necessary, it should be enclosed in suitable, well-ventilated, housing.
Warranty
Monthly Service Plan users benefit from a Lifetime Warranty for so long as the Service Agreement is in full effect. Any Integro™ systems that are purchased outright include a 5-year warranty. Full details of warranty coverage can be found in your Service Agreement. If you believe the Integro™ unit is not functioning properly, you should contact us for further assistance.
*Warranty coverage is subject to the product being installed and operated in accordance with Sidon Water installation instructions and applicable feedwater quality requirements. Further details are set out in the Sidon Water Feedwater Quality Requirements document and the applicable Warranty Terms.